1.The modules are compatible with KRONE LSA-PLUS modules.The design of contacts basing on the principle of airtight contacting makes a completely reliable connection between the contacts and wires.

2.Pulling-out force:tin bronze and silver plating(20-40uinch),pulling-out force not less than 25N.

3.Insulated resistance:under standard atmospheric pressure,insulated resistance no less than 1,000m ohm between the two disjunct  connections.

4.Intermediate resistance between the reed terminators:no less than 7m ohm between intermediate reed under the standard examination condition.

10-pair disconnection module with insulation displacement contacts (IDC), in compliance with IEC 60352-4, on cable side suitable for wire diameters of 1 x 0.4 - 0.8 mm (AWG 26-20), featuring independent double contacts on jumper side, for 2 x 0.4 - 0.65 mm (AWG 26-22) ensuring uninterrupted transfer of connections and delta connections. To snap onto back mount frames, overvoltage protection for permanent personal and equipment protection can be plugged in at the rear. Protection plug with reversible PTC overcurrent protection elements, varistor overvoltage protection, Z-diode-type overvoltage protection to be plugged in at the front, also features contacts for disconnecting, testing and measuring.
Features:
– Cable side up, jumper side down
– Module body material: PC, fiberglass reinforced, halogen-free, UL 94 V-0
– Contact material: spring bronze, silver-plated contact surface
– Grid size: 25 mm